Service

Screw air compressors have become an indispensable tool in various industries, including manufacturing, construction, and automotive. As technology continues to advance, the maintenance of screw air compressors has evolved significantly.  1. Importance of Effective Maintenance Strategies: 1.1...

Air compressors are a type of equipment that is commonly used nowadays. We may encounter some problems during use, such as oil leakage, which is a serious problem. It is not only damage to the machine, but also a waste of resources. So what is the cause of oil leakage and how to solve it?   Air...

The air compressor oil seal falls off or the oil seal is defective (such as wear, etc.), causing oil leakage.The main shaft of the air compressor is loose, causing the oil seal to leak.The joint surface of the air compressor head is leaking, and the joints of the oil inlet pipe and oil return pipe a...

The thermal performance of the air compressor refers to the exhaust pressure, exhaust temperature, power and efficiency. These thermal characteristics will directly affect the operating effect of the air compressor. Exhaust gas temperature 1.Displacement volume The exhaust volume of an air compress...

Extra Noise: When a screw air compressor starts to wear out or develop problems, it will often make more noise than usual. These extra noises may include hissing, scraping, or other unusual sounds. These noises may be caused by wear on the screw, bearings or other critical components. Increased vib...

Aging of the pressure gauge: After long-term use, the pressure gauge will age, causing the pointer to become insensitive or unable to rotate. At this time, the pressure gauge needs to be replaced with a new one. The pressure gauge is damaged: The pressure gauge cannot display the pressure value nor...

If the temperature of the inhaled gas is too high, the exhaust volume will be reduced.If the gas temperature is too high during the compression process, it will increase power consumption and reduce production efficiency.If the cylinder temperature is too high, the lubricating oil will burn out and...

Air compressor users seem to have a misunderstanding that the higher the precision of the air compressor filter, the better. Let me tell you, this is wrong. It does not mean that the higher the filter precision, the better the air compressor filter. Choose the appropriate one. Air compressor filters...

The core of the oil-free air compressor is the two-stage compression host. High-quality bearings and precision gears are installed inside to ensure the coaxiality of the rotor and maintain operation. How to identify oil-free air compressor deterioration? 1.The rolling method is to twist the oil-fre...

When the air compressor head is stuck, first disengage the motor and confirm by rotating the head alone (normal machine heads can be rotated by hand).The screw host may be stuck due to the following reasons: Insufficient lubricating oil. Insufficient lubricating oil may be caused by the following re...

During the operation of the screw compressor, if the oil separation core appears damaged, such as breakage or perforation, then it loses the effect of oil and gas separation. That is to say, if the mixed gas and the exhaust pipe of the compressor are directly connected, a large amount of cooling oil...

For air compressor motors, a common failure problem is motor burnout. The main problem that caused the motor to burn was the current short circuit in the motor of the air compressor. There are situations where the air compressor is used beyond the rated power. You may not be very clear about the da...